Measuring Multiple Solvents in Pulp Mills

Most monitoring systems are only able to measure the percent of flammability of a specific gas or narrow family of gases. In pulping applications, however, it is necessary to measure the overall concentration of all flammable gases and vapors entering the incinerator.

Getting a Fast Response Time in Pulp Mills

Using an analyzer with high sampling speed dramatically improves response time - an important factor in pulp mill applications. 

The environment of the vent pipe that carries the Total Reduced Sulfur compounds (TRS) is dirty and humid. Most gas sensors are quickly impaired by these conditions, leading to unreliable readings.

Because most sensors can only operate at ambient, as opposed to process temperatures, they are positioned far away from incinerators, using a snaking pipe arrangement and pumps to cool samples. 

Thankful for YOU

Thanksgiving is not something you feel for one day… it is an attitude you carry with you all year long. What are you thankful for? Make it a goal to think of one thing to be truly thankful for each and every day. 

All of us at Control Instruments are thankful for YOU. We value your patronage & loyalty and appreciate your confidence in us. May your home be filled with the laughter of friends, the love of family, and the joys of the season. 

Happy Thanksgiving...celebrate Safely!

Straight-Through Flow Design Ideal for TRS Mist Samples

Flammable non-condensible gases (NCG’s), usually referred to as Total Reduced Sulfur compounds (TRS) or Dilute Vent Gases, are byproducts of the wood pulping process. These gases, mostly sulfurous, are extremely malodorous and flammable. 

Health and pollution regulations prohibit the release of these gases into the atmosphere. They are usually eliminated by passing them through an incinerator or by using them as fuel in the burner of a boiler or kiln.

Problems in Pulp & Paper Mills

Last week we talked about the pulp & paper mill process. In the past, continuous sampling and gas monitoring was a problem for this applicaion for three key reasons:

Application Spotlight: Pulp & Paper Mills

Flammable non-condensible gases (NCG’s), usually referred to as Total Reduced Sulfur compounds (TRS) or Dilute Vent Gases, are byproducts of the wood pulping process. These gases, mostly sulfurous, are extremely malodorous and flammable. 

Health and pollution regulations prohibit the release of these gases into the atmosphere. They are usually eliminated by passing them through an incinerator or by using them as fuel in the burner of a boiler or kiln.

Area Monitoring in Wastewater Treatment Plants

We've discussed the complexities of monitoring the waste stream in wastewater treatment applications, but what about the plant itself?

Wastewater treatment plants present a high potential for the existence of hazardous conditions arising from combustible gases, toxic gases and oxygen deficiency. The potential hazards can result in catastrophic property loss as well as personnel safety & health issues. 

An Analyzer Immune to Poisons and Corrosives in Wastewater Treatment

We've been talking about the 3 Key Challenges of Monitoring in Wastewater Treatment. Last week we addressed the first one, this week let's focus on the second:

Manufacturing Day 2017

Happy MFG DAY 2017!!

Manufacturing Day is an annual celebration of modern manufacturing during which manufacturers invite their communities — including students, educators, businesspeople, media, and politicians — to their facilities in a collective effort to educate visitors about manufacturing career opportunities and improve public perceptions of manufacturing. Started in 2012, MFG DAY has seen participation grow dramatically over the years. 

THE MANUFACTURING DAY MISSION

Pages